TP-Link 8-Port 10/100Mbps + 3-Port Gigabit Desktop Switch with 8-Port PoE+ - 10 Ports - Fast Ethernet - Gigabit Ethernet - 10/100Base-TX - 1000Base-T - 1000Base-X - 2 Layer Supported - Modular - 1 ...
$123.59
TP-Link 8-Port 10/100Mbps + 3-Port Gigabit Desktop Switch with 8-Port PoE+ - 10 Ports - Fast Ethernet - Gigabit Ethernet - 10/100Base-TX - 1000Base-T - 1000Base-X - 2 Layer Supported - Modular - 1 SFP Slots - 5.95 W Power Consumption - 124 W PoE Budget - Optical Fiber - Twisted Pair - PoE Ports - Desktop - Wall Mountable - Lifetime Limited Warranty
TL-SL1311MP is an unmanaged switch with 8 10/100 Mbps ports, 2 1000 Mbps ports, and 1 SFP slot that requires no configuration, and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.Power Over Ethernet 8 10/100 Mpbs Auto-Negotiation RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).Overload Arrangement TL-SL1311MP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 124 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.Intelligent Power Management Priority (port 1 > port 2 > port 3>... > port 8): This function will help protect the system when the system power is overloaded. For example, port 1, 2, 3 and 5 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 4 with 30 W, and then the system will cut off the power of port 5 because of the overloaded power, this means port 1, 2, 3 will use 25 W respectively and port 4 will use 30 W, no power will be supplied to port 5.Highlight Performance Up to 250 m PoE power supply and data transmission under Extend Mode. Isolation Mode easily divides traffic for port 1-8 to avoid snooping and tampering, which improves LAN security and performance. With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD). When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically. Easy to UseTL-SL1311MP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 8-Port 10/100Mbps + 3-Port Gigabit Desktop Switch with 8-Port PoE+TL-SL1311MP is a great selection for expanding your network.
TL-SL1311MP is an unmanaged switch with 8 10/100 Mbps ports, 2 1000 Mbps ports, and 1 SFP slot that requires no configuration, and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.Power Over Ethernet 8 10/100 Mpbs Auto-Negotiation RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).Overload Arrangement TL-SL1311MP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 124 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.Intelligent Power Management Priority (port 1 > port 2 > port 3>... > port 8): This function will help protect the system when the system power is overloaded. For example, port 1, 2, 3 and 5 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 4 with 30 W, and then the system will cut off the power of port 5 because of the overloaded power, this means port 1, 2, 3 will use 25 W respectively and port 4 will use 30 W, no power will be supplied to port 5.Highlight Performance Up to 250 m PoE power supply and data transmission under Extend Mode. Isolation Mode easily divides traffic for port 1-8 to avoid snooping and tampering, which improves LAN security and performance. With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD). When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically. Easy to UseTL-SL1311MP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 8-Port 10/100Mbps + 3-Port Gigabit Desktop Switch with 8-Port PoE+TL-SL1311MP is a great selection for expanding your network.
Quantity:
TP-Link 8-Port 10/100Mbps + 3-Port Gigabit Desktop Switch with 8-Port PoE+ - 10 Ports - Fast Ethernet - Gigabit Ethernet - 10/100Base-TX - 1000Base-T - 1000Base-X - 2 Layer Supported - Modular - 1 SFP Slots - 5.95 W Power Consumption - 124 W PoE Budget - Optical Fiber - Twisted Pair - PoE Ports - Desktop - Wall Mountable - Lifetime Limited Warranty
TL-SL1311MP is an unmanaged switch with 8 10/100 Mbps ports, 2 1000 Mbps ports, and 1 SFP slot that requires no configuration, and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.Power Over Ethernet 8 10/100 Mpbs Auto-Negotiation RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).Overload Arrangement TL-SL1311MP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 124 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.Intelligent Power Management Priority (port 1 > port 2 > port 3>... > port 8): This function will help protect the system when the system power is overloaded. For example, port 1, 2, 3 and 5 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 4 with 30 W, and then the system will cut off the power of port 5 because of the overloaded power, this means port 1, 2, 3 will use 25 W respectively and port 4 will use 30 W, no power will be supplied to port 5.Highlight Performance Up to 250 m PoE power supply and data transmission under Extend Mode. Isolation Mode easily divides traffic for port 1-8 to avoid snooping and tampering, which improves LAN security and performance. With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD). When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically. Easy to UseTL-SL1311MP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 8-Port 10/100Mbps + 3-Port Gigabit Desktop Switch with 8-Port PoE+TL-SL1311MP is a great selection for expanding your network.
TL-SL1311MP is an unmanaged switch with 8 10/100 Mbps ports, 2 1000 Mbps ports, and 1 SFP slot that requires no configuration, and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.Power Over Ethernet 8 10/100 Mpbs Auto-Negotiation RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).Overload Arrangement TL-SL1311MP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 124 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.Intelligent Power Management Priority (port 1 > port 2 > port 3>... > port 8): This function will help protect the system when the system power is overloaded. For example, port 1, 2, 3 and 5 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 4 with 30 W, and then the system will cut off the power of port 5 because of the overloaded power, this means port 1, 2, 3 will use 25 W respectively and port 4 will use 30 W, no power will be supplied to port 5.Highlight Performance Up to 250 m PoE power supply and data transmission under Extend Mode. Isolation Mode easily divides traffic for port 1-8 to avoid snooping and tampering, which improves LAN security and performance. With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD). When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically. Easy to UseTL-SL1311MP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 8-Port 10/100Mbps + 3-Port Gigabit Desktop Switch with 8-Port PoE+TL-SL1311MP is a great selection for expanding your network.
TP-Link 8-Port 10/100Mbps + 3-Port Gigabit Desktop Switch with 8-Port PoE+ - 10 Ports - Fast Ethernet - Gigabit Ethernet - 10/100Base-TX - 1000Base-T - 1000Base-X - 2 Layer Supported - Modular - 1 SFP Slots - 5.95 W Power Consumption - 124 W PoE Budget - Optical Fiber - Twisted Pair - PoE Ports - Desktop - Wall Mountable - Lifetime Limited Warranty
TL-SL1311MP is an unmanaged switch with 8 10/100 Mbps ports, 2 1000 Mbps ports, and 1 SFP slot that requires no configuration, and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.Power Over Ethernet 8 10/100 Mpbs Auto-Negotiation RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).Overload Arrangement TL-SL1311MP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 124 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.Intelligent Power Management Priority (port 1 > port 2 > port 3>... > port 8): This function will help protect the system when the system power is overloaded. For example, port 1, 2, 3 and 5 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 4 with 30 W, and then the system will cut off the power of port 5 because of the overloaded power, this means port 1, 2, 3 will use 25 W respectively and port 4 will use 30 W, no power will be supplied to port 5.Highlight Performance Up to 250 m PoE power supply and data transmission under Extend Mode. Isolation Mode easily divides traffic for port 1-8 to avoid snooping and tampering, which improves LAN security and performance. With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD). When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically. Easy to UseTL-SL1311MP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 8-Port 10/100Mbps + 3-Port Gigabit Desktop Switch with 8-Port PoE+TL-SL1311MP is a great selection for expanding your network.
TL-SL1311MP is an unmanaged switch with 8 10/100 Mbps ports, 2 1000 Mbps ports, and 1 SFP slot that requires no configuration, and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.Power Over Ethernet 8 10/100 Mpbs Auto-Negotiation RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).Overload Arrangement TL-SL1311MP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 124 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.Intelligent Power Management Priority (port 1 > port 2 > port 3>... > port 8): This function will help protect the system when the system power is overloaded. For example, port 1, 2, 3 and 5 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 4 with 30 W, and then the system will cut off the power of port 5 because of the overloaded power, this means port 1, 2, 3 will use 25 W respectively and port 4 will use 30 W, no power will be supplied to port 5.Highlight Performance Up to 250 m PoE power supply and data transmission under Extend Mode. Isolation Mode easily divides traffic for port 1-8 to avoid snooping and tampering, which improves LAN security and performance. With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD). When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically. Easy to UseTL-SL1311MP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 8-Port 10/100Mbps + 3-Port Gigabit Desktop Switch with 8-Port PoE+TL-SL1311MP is a great selection for expanding your network.
